General |
Certification |
CE, FCC class A, UL, CCC |
Dimensions (W x H x D) |
UNO-3072A: 140 x 238 x 177 mm (5.5" x 9.3" x 7.0") |
|
UNO-3074A: 181 x 238 x 177 mm (7.5" x 9.3" x 7.0") |
Enclosure |
Aluminum + SECC |
Mounting |
Wallmount, Stand, Panel |
Industrial Grounding |
Isolation between chassis and power ground |
Power Consumption |
25 W (Typical, no add-on card) |
Power Requirement |
9 ~ 36 VDC (e.g +24 V @ 3A), ATX, AT/ATX power Jumper |
|
selection and BIOS AT simulation (support system reboot automatically after power recovery) |
Weight |
UNO-3072A: 4.5 kg / UNO-3074A: 5.0 kg |
OS Support |
WES2009, Windows Vista/XP, Windows 7, Linux, QNX |
System Design |
Fanless with no internal cabling |
Remote Management |
Built-in Advantech DiagAnywhere agent on Windows CE/WES2009 |
System Hardware |
CPU |
Intel Atom D510 1.66 GHz |
Memory |
2 GB DDRII SDRAM built-in |
Battery Backup SRAM |
512 KB |
Expansion Slots |
UNO-3072A: 2 x PCI V2.2 slots |
|
UNO-3074A: 4 x PCI V2.2 slots |
PCI Slot Power |
12 V @ 3 A, -12 V @ 0.8 A, +5 V @ 6 A, |
|
+3.3 V @ 6 A (total combined power consumption on the PCI slots should be less than 40W) |
Indicators |
LEDs for Power, Standby, HDD, SRAM battery, Rx/Tx for COM ports |
Audio |
AC 97, Line Out |
Storage |
CF: 1 x internal type I/ II CompactFlash slot |
|
1 x external type I/ II CompactFlash slot |
|
HDD: Two built-in 2.5" SATA HDD brackets with |
|
support for RAID 0 and RAID 1 |
|
One external SATA 2.0 (does not support hot swap) |
Display |
DB15 VGA connector, 1600 x 1200 @ 85 Hz |
Watchdog Timer |
Programmable 256 level timer interval, from 1~255 sec |
I/O Interface |
LAN |
2 x 10/100/1000Base-T RJ-45 ports (Intel 82574L, supports |
|
Wake on LAN, Teaming, built-in boot ROM, and IEEE1588 hardware support) |
Serial Ports |
2 x RS-232/422/485 with DB9 connectors, automatic RS-485 data flow control, 2 x RS-232 (optional) |
Serial Speed |
RS-232 Speed: 50 bps ~ 115.2 kbps,RS-422/485 Speed: 300 bps ~ 921.6 kbps (Max) |
USB Ports |
5 x USB 2.0 (one internal), 2 x USB 2.0 pin header |
IEEE 1394 (Firewire) |
2 x type B (Bilingual) |
Optional I/O |
PS/2 KB/MS, 2 x COM-232, 2 x USB 2.0, LPT |
Digital Input |
4-ch. contact DI0 ~ DI3 |
Wet contact: |
Logic 0: -3 ~ 3 VDC; Logic 1: ±10 ~ 50 VDC |
Dry contact: |
Logic 0: open; Logic 1: close to GND |
isolation and ESD protect |
1500 VDC,, 50~70 VDC over voltage protection |
Opto-Isolator Response: |
25μs- Interrupt capable channel: DI0 ~ DI3 |
Digital Output |
4 ch. DO0 ~ DO3 |
|
1,500 VDC isolation, 200 mA max/channel sink current |
|
Keeps output status after system hot reset |
|
Open collector to 40V (200mA maximum sink current load) and 3 kHz speed |
Timer/Counter |
Counter Source |
DI1 & DI3 |
Pulse Output |
DO2 & DO3 |
Can be cascaded as one 32-bit counter/timer |
Down counting, preset counting value |
Timer Time Base |
100 kHz, 10 kHz, 1 kHz, 100 Hz |
Environment |
Operating Temperature |
(IEC 60068-2-2, 100% CPU/ I/O loading) |
|
-10 ~ 60°C (14 ~ 140°F) |
Storage Temperature |
-20 ~ 80°C (-4 ~ 176°F) |
Humidity |
95% @ 40°C (non-condensing) |
Shock Protection |
IEC 60068-2-27 |
|
CompactFlash: 50 G @ wall mount, half sine, 11 ms |
|
HDD: 20 G @ wall mount, half sine, 11 ms |
Vibration Protection |
IEC 60068-2-64 (Random 1 Oct./min, 1hr/axis.) |
|
CompactFlash®: 2 Grms @ 5 ~ 500 Hz, |
|
HDD: 1 Grms @ 5 ~ 500 Hz |